Thursday, June 11, 2009

Setting the motor into the frame.











Sheesh. Had to take the motor to the shop in the 34 today with no way to tie it down. Hang on! Literally. So these aluminum rocker boxes are a bit bigger than the stock pan covers and I tried to put the motor right into the cradle but no-go. I took off the front head...no-go. I took off the rear head and it fit right in. Cock the rear head a bit and it slid onto the barrel. Slide the front on and uh-oh. The third mount for the stock gas tanks between the front legs is in the way! Shoot. So out comes the cut-off wheel. Slice and on it goes. A little semi-gloss and good as new. Took all day but the motor is in the frame. Get everything cinched up on the motor tomorrow and put the inner primary on and hopefully get the brake sorted out. Got to get it moving. Only a week of working time left. UPDATE: I got the bike over to Rodney's shop, The Nest yesterday to sort out the engineering of the brake and clutch arms I bent up. We put a sportbike master cylinder under the trans so we had to work out a cable and attach it to the arm. There's a photo of Father Stretch installing the exhaust and of Rodney in contemplation over the brake assembly. Also a photo of Pat checking out the finished product. I'm off to San Diego for a weeks worth of Coast Guard Certification so when I get back we'll get this bike started. Just need to install the throttle cable, clutch basket and pulley, wiring and oil bag, fender, and oil bag mounting bracket...and oil lines...and fix all the stuff that is going to go wrong, right? I'm off to San Diego in the 47'. 44 mph down the 5fwy. HA. Sad but true.

1 comment:

  1. Gabe - That headlight bracket turned out great and I should like to see it in chrome! Have fun in the Coast Guard training this week!

    ReplyDelete

the playlist


Get a playlist! Standalone player Get Ringtones

Followers